Abacus SEO Friendly Web Directory Sigma Solutions - Embedded Systems Training ISO Certified - Dilsukhnagar Ameerpet Best Embedded Systems - Modules

Modules

RFID

  • Specifications
  • Input Voltage 5V DC regulated
  • Output Data Speed 9600 BPS
  • 8 Bit Data/No-Parity/1 Stop Bit
  • Output Data Level 5V TTL level
  • Detection Range 7 cm(2” inches) contact-less
  • Valid Tag in Range Indicated by Buzzer and LED
  • Features
  • Low-cost method for reading passive RFID transponder tags
  • 9600 bps serial interface at 5V TTL level for direct interface to microcontrollers
  • Buzzer & LED indicate valid RFID Tag detection
  • Range up to 7 cm for 125 Khz RFID Cards or Keychains

 

GSM

  • Specifications
  • Uses the extremely popular SIM300 GSM module
  • Provides serial TTL interface for easy and direct interface to microcontrollers
  • Can be controlled through standard AT commands
  • Comes with an onboard wire antenna for better reception.
  • Modem a low power consumption of 0.25 A during normal operations and around 1 A during transmission
  •  Operating Voltage: 9V DC (board has onboard Regulator)
  • Features
  • Power RING and Network LEDs for easy debugging
  • The SIM300 allows Baud rate 9600(default)
  • Provides the industry standard serial RS232 interface for easy connection to computers and other devices
  • Simple to Use and Low Cost

 

GPS

  • Specifications
  • Operating Voltage 9-12 V V AC/DC Power Supply
  • Operating Current 150 mA
  • Sensitivity -160 dBm
  • Channels 65 parallel channels all in view searching L1 C/A code
  • Protocol output baud rate 9600 bps no handshaking(8-N-1)
  • Protocol format NMEA0183 V 3.01 GGA,GLL,GSA,GSV,RMC,VTG
  • Output Voltage level RS232 level +12/-12 Can connect directly to PC serial port
  • Frequency 1,1575.42 Mhz
  • C/A Code 1.023 Mhz chip rate
  • Features
  • High sensitivity -160dBm
  • Searching up to 65 Channel of satellites
  • LED indicating data output
  • Low power consumption
  • GPS L1 C/A Code

 

ZIGBEE

  • Specifications
  • Digital I/O lines
  • I/O line passing
  • Analog-to-digital conversion
  • 16 channels
  • 128-bit encryption
  • Voltage requirements: 2.8 to 3.4 VDC (reduced performance below 3.0V)
  • Current requirements: ~45 mA (transmit), ~50 mA (receive), <10 uA (sleep)
  • Communication: CMOS UART @ ~3.3V
  • Dimensions: 1.08″ L x 0.96″ W x 0.16″ H (27.61 x 24.38 x 4.06 mm)
  • Operating temperature range: -40 to +185 °F (-40 to +85 °C)
      • Features
      • Outdoor range up to 300 feet (90 m) line of sight
      • Indoor range up to 100 feet (30 m)
      • Data rate up to 250 Kbps
      • 2.4 GHz frequency band (accepted world-wide)

 

LCD

  • Features
  • Interface with either 4-bit or 8-bit microprocessor.
  • Display data RAM
  • 80 × 8 bits (80 characters).
  • Character generator ROM
  • 160 different 5 × 7 dot-matrix character patterns.
  • Character generator RAM
  • 8 different user programmed 5 × 7
  • dot-matrix patterns.
  • Display data RAM and character generator RAM may be accessed by the microprocessor.
  • Numerous instructions
  • Clear Display, Cursor Home, Display
  • ON/OFF, Cursor ON/OFF, Blink Character,Cursor Shift, Display Shift.

Built-in reset circuit is triggered at power ON.

 

Keypad(4x4MembraneType,Self Adhesive)

      • Features
      • Ultra-thin design
      • Adhesive backing
      • Excellent price/performance ratio
      • Easy interface to any microcontroller
      • Specifications
      • Maximum Rating: 24 VDC, 30 mA
      • Interface: 8-pin access to 4×4 matrix
      • Operating temperature:                 32 to 122 °F (0 to 50°C)
      • Dimensions: Keypad, 2.7 x 3.0 in (6.9 x 7.6 cm)
      • Cable Length: 3-1/3″ or 85mm (include connector)
      • Weight: 8g
      • Connector: Dupont 8 pins, 0.1″ (2.54mm) Pitch
      • Mount Style: Self-Adherence
      • Max. Circuit Rating: 24VDC, 30mA
      • Insulation Spec.: 100M Ohm, 100V

 

Ultrasonic Sensor

      • Features
      • Minimum range 10 centimeters
      • Maximum range 400 centimeters (4 Meters)
      • Accuracy of +-1 cm
      • Resolution 1 cm
      • 5V DC Supply voltage
      • Compact sized SMD design
      • Modulated at 40 kHz
      • Serial data of 9600 bps TTL level output for easy interface with any microcontroller
      • Specifications
      • Supply Voltage 5 V
      • Supply Current 15 mA
      • Output Data speed 9600 Bps
      • Output Data Format 8-N-1 8 data bytes, no parity, 1 stop bit

 

DS1307

  • Features
  • Real-Time Clock (RTC) Counts Seconds,
  • Minutes, Hours, Date of the Month, Month, Day of the week, and Year with Leap-Year Compensation Valid Up to 2100
  • 56-Byte, Battery-Backed, Nonvolatile (NV) RAM for Data Storage

I2C Serial Interface

 

DC Motor

  • Specifications
  • Voltage: 12.0VDC
  • Output Speed: 200 +/- 10% RPM
  • No-Load output current: =< 50 mA
  • Rotation Output: CW / CCW
  • Noise: No Gear Noise
  • Stall output: : Slip Gear, Broken Gear is not allowed

Output shaft of the axial clearance: =< 0.1 ~ 0.3mm, Horizontal clearance requirement =< 0.05

 

RF Transmitter and Receiver

      • Transmitter(Features)
      • Frequency Range: 433.92 MHZ.
      • Supply Voltage: 3~12V
      • Output Power: 4~16dBm
      • Circuit Shape: Saw
      • Receiver(Features)
      • Receiver Frequency: 433.92 MHZ
      • Typical sensitivity: -105dBm
      • Supply Current: 3.5mA
      • IFrequency: 1MHz
      • Low power consumption
      • Operation voltage: 5 Volts

 

Enquiry Form